现代工业产品对生产环境的要求越来越高，这就需要地面有较高的清洁度，因为起尘的地面会影响产品的加工精度和设备的使用寿命。一个整洁、美观的生产环境，还可以提高工作效率。任何一种环氧地坪都不存在绝对最好的材料，下面就给大家分析下环氧地坪漆涂装和耐磨地坪涂装各自优缺点。

Modern industrial products require more and more high production environment, which requires a higher degree of cleanliness of the ground, because the dust ground will affect the product processing accuracy and equipment life. A clean and beautiful production environment can also improve work efficiency. Any kind of floor does not exist absolutely the best material, the following to everyone under the analysis of epoxy floor paint coating and wear-resistant floor coating their respective advantages and disadvantages. 环氧地坪漆涂装

Epoxy floor paint finishing

环氧地坪技术是指在已经凝固好的水泥环氧地坪上覆涂环氧树脂地坪漆，厚度在1-5mm左右，形成一个致密的有机保护层。

Epoxy floor technology refers to the epoxy resin coating on the already solidified cement floor with a thickness of about 1-5mm, forming a dense organic protective layer.

由于环氧树脂是有机物，所以保护层具有耐水性、耐酸碱性、耐油性、耐盐雾腐蚀性等化学特性，且平坦无缝、易清洁、易维护保养等。环氧环氧地坪漆是现代工业广为使用的长效地坪漆材料。

Because epoxy resin is an organic substance, the protective layer has water resistance, acid and alkali resistance, oil resistance, salt spray corrosion resistance and other chemical characteristics, and flat seamless, easy to clean, easy to maintain and so on. Epoxy floor paint is a long-lasting floor paint material widely used in modern industry.

但是，环氧地坪漆有众多优点的同时，也有几个致命的弱点：

However, epoxy floor paint has many advantages as well as several fatal weaknesses.

硬度与耐磨性：生产车间、停车场、制造业等场所由于重的移动荷载比较大且频繁使用如汽车、叉车、移动小推车等，很容易划伤、起壳、脱落等现象。

Hardness and wear resistance: workshop, parking lot, manufacturing and other places because of heavy moving loads and frequent use such as automobiles, forklifts, mobile trolleys, it is easy to scratch, shelling, shedding and other phenomena.

耐磨地坪涂装

Abrasion resistant floor coating

耐磨地坪是用水泥或混凝土浇筑过程中掺入金刚砂或者其他骨料，整体凝固而成，加硬层厚度在3-10mm左右。

Wear-resistant floor is made of cement or concrete pouring process mixed with diamond or other aggregate, the whole solidification, hardened layer thickness of about 3-10 mm.

由于金刚砂等骨料硬度极高，所以硬质地坪的莫氏硬度为6-7，常见物质中基本没有什么东西能划伤其表面，所以硬质地坪耐磨坚硬、平坦无缝，除了可以用作工业厂房地坪以外，还可以用于仓库、车库、广场等辅助设施地面。

Because the hardness of aggregate such as diamond is very high, so the hardness of the hard floor is 6-7, there is basically nothing in the common material can scratch its surface, so hard floor wear-resistant hard, flat and seamless, in addition to being used as industrial plant floor, can also be used in warehouses, garages, plazas and other auxiliary facilities.

但是采用这种技术生成的地面是用水泥作粘合金刚砂而成，所以具有水泥制品的特性，表面势必会形成大量水分蒸发后遗留的毛细孔，这些微孔对地面效果造成负面影响，对光线产生漫反射，使光泽度大大降低，如果不打蜡养护，就没有良好的视觉效果。

However, the ground produced by this technology is made of cement bonded emery, so it has the characteristics of cement products, the surface is bound to form a large number of water evaporation after the formation of pores, these micro-pores on the ground effect has a negative impact on the diffuse reflection of light, so that glossiness is greatly reduced, if not waxed. There is no good visual effect in nursing.

工业地坪涂装施工在不同行业对生产条件有不同要求，而工业地坪漆的选择也会因情况而异。

Industrial floor painting construction in different industries have different requirements for production conditions, and the choice of industrial floor paint will vary according to the situation.